P-teroctyl phenol
Chinese name: p-tert-octylphenol
English name: p-tert-octylphenol
Designation: 4- tert – octylphenol, 4- tert – octylphenol, etc
Chemical formula: C14H22O
Molecular weight: 206.32
CAS login number: 140-66-9
EINECS login number: 205-246-2
Melting point: 83.5-84℃
Physical property
[Appearance] white flake crystal at room temperature.
【 Boiling point 】 (℃) 276
(30mmHg) 175
Melting point (℃) 83.5-84
【 Flash point 】 (℃) (enclosed) 138
【 Density 】 Apparent density g/cm3 0.341
The relative density (120℃) was 0.889
【 Solubility 】 Insoluble in water, soluble in most organic solvents.
Stability. Stability
Chemical property
[CAS login number] 140-66-9
【EINECS entry number 】205-246-2
Molecular weight: 206.32
【 Molecular Formula and Structural formula 】 The molecular formula is C14H22O, and the chemical formula is as follows:
Common chemical reaction with benzene ring substitution reaction and hydroxyl reaction properties.
[Forbidden compound] strong oxidant, acid, anhydride.
[Polymerization hazard] No polymerization hazard
Main use
P-teroctyl phenol is a raw material and intermediate of fine chemical industry, such as the synthesis of octyl phenol formaldehyde resin, widely used in oil additives, ink, cable insulation materials, printing ink, paint, adhesive, light stabilizer and other production fields. Synthesis of non – ionic surfactant, widely used in detergent, pesticide emulsifier, textile dye and other products. Synthetic rubber auxiliaries are indispensable for the production of radial tires.
Toxicity and environmental effects
P-teroctyphenol is a toxic chemical that is irritating and corrosive to the eyes, skin and mucous membranes and can cause blurred vision, congestion, pain and burning. Large amounts of inhalation can cause coughing, pulmonary edema, and difficulty breathing. Frequent contact with skin can cause skin bleaching. Moderate irritation: Rabbit eye meridian: 50μg/ 24h. Moderate stimulation: 20mg/24 hours percutaneous in rabbits. Acute poisoning rats transoral LD502160mg/kg. Attention should be paid to the potential environmental hazards caused by waste and by-products from the production process.
Packing, storage and transportation
The products are packed in woven bags lined with plastic bags or cardboard drums, each bag weighing 25 kg net. Store in a dry, clean and ventilated room. Keep away from strong oxidants, strong acids, anhydrides and food, and avoid mixed transportation. Storage period is one year, beyond the storage period, after inspection can still be used. Transport according to combustible and toxic chemicals management.
Post time: Feb-20-2023